Kitchen Kompact Warmwood - Range & Sink Base Cabinets (RBS) – Home

May 14,2024

*Please allow 3-5 days for products to arrive at store*Shaker style door frames are made of solid beech mortised and tenoned. The recessed plywood insert is three-ply with a rotary cut hard maple veneer. Face frames are built using a mixture of solid beech and sycamore. Drawer heads have routed finger pulls. Frames: Al.

*Please allow 3-5 days for products to arrive at store*
Shaker style door frames are made of solid beech mortised and tenoned. The recessed plywood insert is three-ply with a rotary cut hard maple veneer. Face frames are built using a mixture of solid beech and sycamore. Drawer heads have routed finger pulls.

Frames: All frames are built of solid 3/4 hardwoods. Each rail is kiln-dried,
joined by mortise and tenon, then glued for added strength.

End Panels: End panels are wood veneered, 1/2 thick engineered wood core
plywood, fastened to front frame with tongue-in-groove construction.

Backs: 1/8 hardboard, recessed in sides.

Bottoms: 3/16 hardboard dadoed into sides and power nailed into
supporting strips.

Hanging Rails: Solid wood, 3/4 x 1-1/2, located at top.

Corners: Plastic corner braces power nailed.

Toe Kick: 3/4 pine.

Shelf: 1/2 engineered wood 11 deep dadoed into sides, with rounded front
edge and printed wood grain.

Hardware: Chadwood, Glenwood, Warmwood, and DWhite feature concealed
self-closing hinges — no door pulls included.

Finish: A 4-step process is applied to the exterior finish of Glenwood,
Warmwood, and Chadwood: Stain, Sealer, Sanding, and Catalyzed Top Coat.
This finish is resistant to household chemicals such as water, beverages, mild
acids – even nail polish. A 3-step process is applied to the exterior finish of
DWhite: Primer (2 coats), Sanding, and Enamel.